Benchmarking in municipal solid waste recycling

The paper presents an analysis of the factors influencing the recycling potential of municipalities in Israel, including population size and density, geographic location, current waste levels, and current waste management system. We employ a standard regression analysis in order to develop an econometric model to predict where potential for economically efficient recycling is highest. By applying this model to readily available data, it is possible to predict with close to 90% accuracy whether or not recycling will be economically efficient in any given municipality. Government agencies working to promote advanced waste management solutions have at their disposal only limited resources and budget, and so must concentrate their efforts where they will be most effective. The paper thus provides policy-makers with a powerful tool to help direct their efforts to promote recycling at those municipalities where it is indeed optimal.     

Impact of economic policy uncertainty on CO2 emissions: evidence from top ten carbon emitter countries

Environmental Science and Pollution Research - Over the last few decades, economic policy uncertainty (EPU) has surged across the globe. Furthermore, EPU affects economic activities, which may also...     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

The impact of enhanced atmospheric carbon dioxide on yield, proximate composition, elemental concentration, fatty acid and vitamin C contents of tomato (Lycopersicon esculentum)

The global average temperature has witnessed a steady increase during the second half of the twentieth century and the trend is continuing. Carbon dioxide, a major green house gas is piling up in the atmosphere and besides causing global warming, is expected to alter the physico-chemical composition of plants. The objective of this work was to evaluate the hypothesis that increased CO₂ in the air is causing undesirable changes in the nutritional composition of tomato fruits. Two varieties of tomato (Lycopersicon esculentum) were grown in ambient (400 μmol mol^?1) and elevated (1,000 μmol mol^?1) concentration of CO₂ under controlled conditions. The fruits were harvested at premature and fully matured stages and analyzed for yield, proximate composition, elemental concentration, fatty acid, and vitamin C contents. The amount of carbohydrates increased significantly under the enhanced CO₂ conditions. The amount of crude protein and vitamin C, two important nutritional parameters, decreased substantially. Fatty acid content showed a mild decrease with a slight increase in crude fiber. Understandably, the effect of enhanced atmospheric CO₂ was more pronounced at the fully matured stage. Mineral contents of the fruit samples changed in an irregular fashion. Tomato fruit has been traditionally a source of vitamin C, under the experimental conditions, a negative impact of enhanced CO₂ on this source of vitamin C was observed. The nutritional quality of both varieties of tomato has altered under the CO₂ enriched atmosphere.     

A lysimeter experimental study and numerical characterisation of the leaching of incinerator bottom ash waste

Incinerator bottom ash (IBA) is a residual produced from incinerating municipal solid waste. In the past, IBA presented a big waste disposal problem; however, various recycling approaches have been adopted in recent years to mitigate this problem, as well as to provide a useful alternative to using primary aggregate resources. The use of IBA as an alternative to conventional aggregates in different civil engineering construction applications helps to conserve premium grade aggregate supplies; however, when IBA is in contact with water in the field, as a consequence of precipitation events or changes in water table, elements, such as salts and heavy metals, may be released to the soil and ground water. In this work, IBA waste was mixed with limestone aggregate to produce a blend with acceptable mechanical properties and minimum environmental risks for use as road foundation. The study focused on evaluating potential environmental impacts of some constituents, including sulphate, chloride, sodium, copper, zinc and lead in IBA blends using a lysimeter as a large scale leaching tool. Moreover, a specific scenario simulating field conditions was adopted in the lysimeter to assess the potential impact of changing conditions, such as IBA content in the blend, liquid to solid ratio (L/S) and pH value, on long-term release of heavy metals and salts. Then, numerical modelling was used to predict the release of the aforementioned constituents from IBA based on initial measurement of intrinsic material properties and the kinetic desorption process concept. Experimental results showed that zinc and lead were released in very low concentrations but sodium and sulphate were in high concentrations. The control limestone only blend also demonstrated low release concentrations of constituents in comparison to IBA blends, where constituent concentrations increased with increase in IBA content. Experimental results were compared with numerical results obtained using a non-equilibrium desorption model. Good agreement was found between the two sets of data.     

Physiological and biochemical defense reactions of Vicia faba L.–Rhizobium symbiosis face to chronic exposure to cyanobacterial bloom extract containing microcystins

The presence of cyanotoxins, mainly microcystins (MCs), in surface freshwater represents a serious health risk to aquatic organisms living in the water body, as well as terrestrial animals and plants that are in contact with contaminated water. Consequently, the use of MCs contaminated water for irrigation represents a hazard for cultivated plants and could induce severe economical losses due to crops’ yield reduction. The experimental approach undertaken in this work was exposing Vicia faba seedlings (inoculated with a Rhizobium strain resistant to MCs), to water supplemented with cyanobacterial crude extract containing total microcystins at a concentration of 50 and 100 μg/L (environmental relevant concentrations of MCs dissolved in the raw irrigation water from Lalla Takerkoust Lake-Marrakesh region). After chronic MCs exposure (2 months), biological and physiological parameters (plant growth, nitrogen uptake, mineral assimilation, and oxidative defense mechanisms) were evaluated. The results obtained showed evidence that chronic exposure to cyanobacterial bloom extract containing MCs strongly affected the physiological and biological plants activities; reduction of dry matter, photosynthetic activity, nodule number, and nitrogen assimilation. At the same time, an increase of oxidative stress was observed, as deduced from a significant increase of the activities of peroxidase, catalase, polyphenoloxidase, and phenylalanine ammonia lyase in leaves, roots, and nodules of faba bean plants exposed to cyanotoxins, especially at 100 μg/L of MCs. This experimentation constitutes a simulation of the situation related to cyanotoxins chronic exposure of seedlings—plants via the contaminated irrigation water. For this reason, once should take into consideration the possibility of contamination of agricultural crops and the quality of irrigation water should be by the way monitored for cyanotoxins biohazard.     

Levels,distribution profile,and risk assessment of polychlorinated biphenyls (PCBs) in water and sediment from two tributaries of the River Chenab,Pakistan

The first study aimed to investigate the polychlorinated biphenyl (PCB) concentration level, spatial distribution pattern, and ecological risk assessment of water and sediment samples from two tributaries (Nullah Aik and Palkhu) of the River Chenab, Punjab Province, Pakistan. A total of 32 PCB congeners were analyzed, and PCB concentration in sediment and water samples ranged between 0.80 and 60 ng/g and 0.20 and 28 ng/L, respectively, where tetra-CBs and tri-CBs dominated over other studied PCB homologs. Dioxin toxicity equivalency (TEQ) was calculated and PCB-126 and PCB-169 showed the higher TEQ values compared with the WHO guidelines, and sediment samples were more toxic than the water samples. The results of the present study should be considered seriously by government authorities to take a proper action against unchecked discharge of contaminants in ecological integrities; otherwise, there may be drastic results in the near future.     

The effect of changing the fuel of the LASTFIRE test

The LASTFIRE test is intended for the evaluation of foams used in extinguishing fires of flammable and combustible liquids in storage tanks in refinery and oil related facilities. The purpose of this study is to find, experimentally, an alternative fuel to be used in the LASTFIRE test, as a replacement for the heptane fuel, which is normally used in this test. Beside heptane, three other fuels are tested in the current study: diesel, jet A1 and kerosene. The study involved performing the LASTFIRE test, using each of the fuels and then comparing the results. The same foam is used as an extinguishing agent for all the tests and for each fuel, tests are conducted three times with separate foam discharging nozzles: semi-aspirated, aspirated and system. Using a commonly used scoring system, the results of the four fuels are evaluated. Any replaceable fuel should obtain the similar score as that is obtained by heptane. The study shows that none of the three alternatives has been judged to be suitable to replace heptane, in the LASTFIRE test.     

Tackling the issue of rural–urban water transfers in the Ta'iz region, Yemen

The Ta'iz region of Yemen is facing serious water problems. Total water use has become unsustainable. While agriculture places a heavy demand on the region's water resources, supplies for the fast growing city and the industrial sector are severely rationed despite their much higher willingness-to-pay for water relative to the returns on most agricultural uses. The article considers several decentralized management options for enhancing sustainability and improving intersectoral water allocation. These include, taxing groundwater extractions, taxing inputs used in pumping groundwater, and implementing a tradable water rights regime. The first two options could lead to resource conservation but are politically difficult to implement and may not necessarily result in better intersectoral water allocation. The tradable water rights regime has potential for achieving the twin objectives of resource conservation and improved intersectoral resource allocation. If farmers' de facto water rights were legitimized, this option would be more acceptable to them. However, the following additional conditions need to be met for making the option viable: (a) a set-aside allocation is made for lifeline supplies for the poor; ( b) the water law provides for separation of water rights from land rights; and (c) community organizations are involved as co-managers of the region's water resources.     

Effect of DTPA on Cd solubility in soil – Accumulation and subsequent toxicity to lettuce

In a controlled environment experiment, using Cd spiked soil, lettuce plants were grown under a range of DTPA levels and were subsequently harvested to determine levels of phytoaccumulation. Cadmium phytoaccumulation significantly increased with increasing soil Cd level (P < 0.05) but unexpectedly decreased with increasing DTPA levels, despite the fact that solubility of Cd was increased in the soil. Cadmium translocation (from root to shoot) increased after DTPA application. Lettuce growth was inhibited by both Cd and DTPA (at and above 10 and 500 mg kg^?1 respectively), as a result of higher Cd mobility and subsequent toxicity which was caused by DTPA higher dosages. Metal solubility in the soil (ranged between 2.8 and 26.5 mg kg^?1) was found to be significantly higher (P < 0.01) as compared to control with increasing DTPA levels even after 3 months of DTPA application. Cadmium tissue concentration in all DTPA treatments was less than in the corresponding control treatment, indicating a negative effect of DTPA application on Cd uptake. In conclusion, lettuce was an unsuitable plant species for Cd accumulation, at least when associated with a DTPA chelator.